AQUAMAT Tank cleaning units
Hammelmann tank cleaning units remove deposits and incrustations from the inner and outer walls of tanks and tank installations at operating pressures of up to 1800 bar. The units operate solely using the power of the water jet. Hammelmann offers a wide range of nozzle holders for the various applications. The tank cleaning units can be fitted with one or two nozzle holders.
Your advantages at a glance
Cleaning of smaller and medium-sized containers
For smaller and medium-sized tanks, the AQUAMAT tank cleaning device is positioned centrally and driven and rotated by the recoil of the water jets. The rotation speed is adjusted and kept constant by a maintenance-free eddy current brake.
Overview AQUAMAT models (Other models on request)
S 600
Operating pressure:
up to 600 bar
Flow rate*:
up to 100 l/min.
Access opening:
from Ø 98 mm
Weight:
~ 4,9 kg
L 500 Plus EX
Operating pressure:
up to 500 bar
Flow rate*:
up to 300 l/min.
Access opening:
from Ø 130 mm
Weight:
~ 11,8 kg
L 1500 Plus
Operating pressure:
up to 1500 bar
Flow rate*:
up to 300 l/min.
Access opening:
from Ø 130 mm
Weight:
~ 11,5 kg
L 1500 Plus Titan
Operating pressure:
up to 1500 bar
Flow rate*:
up to 300 l/min.
Access opening:
from Ø 130 mm
Weight:
~ 8,1 kg
L 1800 Plus
Operating pressure:
up to 1800 bar
Flow rate*:
up to 200 l/min.
Access opening:
from Ø 135 mm
Weight:
~ 11,5 kg
XL 1600 Plus
Operating pressure:
up to 1600 bar
Flow rate*:
up to 450 l/min
Access opening:
from Ø 150 mm
Weight:
~ 18,4 kg
XL 1600 Chemistry
(Pumping chemicals / Gas-tight)
Operating pressure:
up to 1600 bar
Flow rate*:
up to 250 l/min.
Access opening:
from Ø 205 mm
Weight:
~ 38,5 kg
XXL 1600
Operating pressure:
up to 1600 bar
Flow rate*:
up to 700 l/min.
Access opening:
from Ø 300 mm
Weight:
~ 93,0 kg
AQUAMAT Select
Operating pressure:
bis 1600 bar
Flow rate*:
bis 500 l/min.
Access opening:
ab Ø 400 mm
Weight:
~ 72,0 kg
Explanation of symbols
*Energy-efficient flow rates with low pressure loss. However, higher flow rates are possible.
Zone 0 - Protected against explosions
Chemical media may be pumped
Gas-tight / Pressure-resistant
Large tank cleaning with the AQUAMAT Select
The cleaning time is reduced by an oscillating movement of the nozzle arms. The oscillation angle can be limited to 35° or 83°. The rotation around the vertical device axis can be preselected to 36° or 81°. When used in large tanks, the tank cleaning device is positioned on the tank wall and offset in sections.
The drive of the AQUAMAT Select is generated by a second, recoil-driven nozzle arm. For its permanent rotation, different nozzle diameters are used depending on the operating pressure. This allows the cleaning time or cleaning performance to be optimized. Further variants for adaptation to the cleaning situation (floor, ceiling) are possible.
Accessories & configuration
Nozzle holder
Hammelmann supplies nozzle holders with various designs, lever arms and lance lengths in order to achieve the performance and cleaning standards defined in the respective requirements. Particularly compact designs make cleaning through small openings possible.
Nozzle holder type "S" for TCU "L"
Nozzle holder type "V" for TCU "L"
Nozzle holder type "S" for TCU "XL"
Nozzle holder type "V" for TCU "XL"
Nozzle holder type "L" for TCU "XL"
Special version for cleaning smokestacks
Extension lances from 110 mm to 1100 mm
Nozzle inserts
An overview of all available nozzle inserts can be found here:
Other configuration options and accessories
Protective cover
Robust plastic protective cover for tank cleaning unit and nozzle holder.
Guide sled
Guide sled for carrying out pipe cleaning using tank cleaning units. The unit is mounted in the center of the guide sled. The pulling device is attached to the fitted eyelet. Optionally available with kick plate for self-propulsion forwards.
Connection pipes
Connection pipes stabilize the tank cleaning unit and prevent deflection on freely suspended tank cleaners with the unit brake set to maximum (max. 1000 bar).
Media gallery
Hammelmann app
Keep up to date
© Hammelmann Corporation 2024, all rights reserved
